VitalPBX Trunk Configuration
- Tom Cavey
Create a new sip trunk by going to PBX -> External -> Trunks.
In the description, put a unique name. Example: "Primary trunk"
For outgoing peer configuration put a unique username in local username even though VoIP Innovations uses IP authentication. If you do not put a username, configuration will fail. Example: "primary-out"
Set the remote host to the necessary outbound signaling IP provided by VoIP Innovations. Example: 64.136.174.30
On insecure, select port, invite.
Turn qualify off.
Moving to the incoming user configuration put a unique username.
If you do not put an incoming username, even using IP based authentication, your incoming calls will be REJECTED. Example: "primary-in"
Set the host to the necessary inbound signaling IP provided by VoIP Innovations. Example: 64.136.173.31
On insecure, select port & invite.
Turn on IP Authentication and turn off qualify.
