This document contains all the IP addresses that VoIP Innovations uses for SIP signaling.
| Info |
|---|
The Traffic Type column is color-coded based on whether the type is Outboundor Inbound: |
Traffic Type | Primary IP | Secondary IP | Tertiary IP | Quaternary IP |
|---|
Quinary IP
Outbound - Conversational (VI Server: US Primary) | 64.136.174.30 | 64.136.173.22 | 209.166.128.200 |
192.240.151.100
Not in use
N/A | |||
Outbound - Conversational (VI Server: Secondary) | 64.136.174.65 | 64.136.173.23 | 209.166.128.201 |
192.240.151.101
Not in use
N/A | |||
Outbound - Short Duration (VI Server: US Primary) | 64.136.174.35 | 64.136.173.32 | 209.166.128.200 |
192.240.151.100
Not in use
N/A |
Outbound - Short Duration ( |
64.136.164.215 | 64.136.173.34 | 209.166.128.201 |
192.240.151.101
Not in use
N/A | ||||
Inbound / Origination (VI Server: US Primary) | 64.136.173.31 | 64.136.174.30 | 64.136.174.20 | 209.166.154.70 |
192.240.151.100
Inbound / Origination ( |
64.136.173.65 | 64.136.174.65 | 64.136.174.21 | 209.166.154.71 |
| Info |
|---|
Disclaimer: Due to the way that on-net routing functions, it is possible to receive inbound calls from an IP address that is only labeled as outbound (Conversational and Short Duration) in the table above. To avoid any potential issues, it is recommended that you configure your server to accept inbound traffic from these IP addresses as well. |
...
Support: 877-478-6471 option #4 #2 OR support@voipinnovations.com
Frequently Asked Questions
Q: Where do I send my outbound traffic?
A: Please send normal outbound traffic to the “Conversational” row of IP addresses starting with the primary IP address (64.136.174.30). If you are sending short-duration traffic, please send this to the Short Duration row of IP addresses starting with 64.136.174.35.
| Note |
|---|
Please do not send any outbound traffic to the “Origination” row of IP addresses, as these calls will likely fail. That section is only used for inbound calls that VI sends to your network. |
Q: What are the “Advanced Server” rows used for?
A: These are only used if your account is actively utilizing our “Advanced Server Configuration” feature. For more information, please see our Wiki article on the subject. If you are not using this feature, you won’t need to worry about these IP addresses.
Q: Do I need to add all these IP addresses to my system?
A: Basically, yes. In order to take full advantage of our redundancy, please ensure that your network can accept inbound calls from all the IP addresses in this document.
If you need help configuring your PBX to utilize these IP addresses, please see our Wiki section: PBX Trunk Configuration
Q: Does VoIP Innovations support SIP over TCP or UDP?
A: VI supports SIP over both TCP and UDP.
Q: Which IP addresses will I receive audio/RTP traffic from?
A: VoIP Innovations does not proxy the audio of your calls. You will exchange audio/RTP directly with our underlying carriers’ media gateways. We recommend being able to accept audio from any IP address, and For incoming audio, we recommend opening UDP ports 10,000 to 20,000 on your network. For outbound audio, we recommend making firewall provisions to send audio to UDP ports 6,000 to 65,000.