...
Go to Connectivity → Trunks. Then click on + Add Trunk and select Add SIP (chan_pjsip) Trunk.
...
Let’s create an a trunk for inbound trunkcalls. You can name it whatever you like. For this example, we’ll use “VI_Inbound”.
...
Follow the exact same steps as above, however this time we’ll be creating trunks for outbound trunkscalls. Your settings should may look something like this:
...
First, we will create a an outbound route for 911 calls. Your settings should may look something like thisthe ones below. Be sure to add all of the trunks we created under Trunk Sequence for Matched Routes.
...
Under Trunk Sequence for Matched Routes, let’s use all of the outbound trunks that we created:
...
Your Dial Patterns tab should may look something like this:
...
If you make the change in the VI Back Office, please be sure to update your inbound route in FreePBX.
...
That’s it! You should now be ready to send and receive calls with VoIP Innovations!